HUBER Solutions for Recycling of Plastic Waste

  • Complete solutions from one source
  • Longtime experience in wastewater, process water, waste and sludge treatment
  • Well-proven and powerful products and systems

Plastic waste, for example bottles and foils, can be processed via material recycling or energy utilization in order to produce recycled products or to generate energy.

The prerequisite is that the plastic waste is freed of contaminants and cleaned. Such impurities are mineral (e.g. sand, stones, glass, metal) or organic (e.g. paper, food waste, vegetable residues).

HUBER offers reliable, well-proven products and solutions to support all these process steps.

Berendezés koncepciója

Berendezés koncepciója

A részletes információkat tartalmazó nagyobb, interaktív megjelenítéshez és további linkekhez kattintson a képre
A részletes információkat tartalmazó nagyobb, interaktív megjelenítéshez és további linkekhez kattintson a képre



Organic waste is supplied in solid or liquid form, the latter being mainly contents of grease trap. For their reception bunkers we supply customized stainless steel covers.

The supplied waste is first ground in a mill and conveyed to a pulper whereby metals are separated. In the pulper they are soaked in hot process water, mixed, homogenized and disinfected.

The thus generated hot slurry is then mechanically pre-treated in a HUBER Complete Plant that is specifically adapted for this task. Debris and other disturbing solids (e.g. packing and wrapping materials) are removed with an integrated Fine Screen, and heavy mineral solids (e.g. stones, grit, sand and broken glass) are separated in an aerated Grit Chamber. The removed screenings are washed and compacted in our Wash Press, the separated mineral solids are washed and dewatered in our Grit Washer. The compacted screenings are incinerated as solid waste and the washed grit is reused as construction material. In order to remove even finer solids (e.g. hair and fibres), that could form disturbing scum layers in the fermenter, we provide a HUBER Sludge Screen (e.g. a Strainpress).

Within the fermenter the organic substrate is anaerobically degraded whereby biogas is produced. The biogas is used to generate power and heat in a cogeneration plant. The non-degradable fermentation residues are dewatered with our Screw Press, and their amount can be further reduced in a HUBER Sludge Drying Plant. We use the heat generated by cogeneration for the drying process. Dewatered or dried fermentation residues are either utilized energetically as fuel, or materially as fertilizer and for soil improvement.

Wastewater that has been generated in the various treatment processes is collected, chemically conditioned and treated in a HUBER Dissolved Air Flotation Plant. The removed flotate sludge is returned into the pulper. The treated effluent is recycled as process water, it is either heated with heat exchangers and fed into the pulper, or used as wash water.

When we implement our solutions, we also provide our well-proven HUBER stainless steel components, e.g. Screw Conveyors, Manhole Covers and Stairways, Platforms and Guardrails.




HUBER Dissolved Air Flotation Plant HDF
KULT® Middle Temperature Sludge Dryer BT+
ROTAMAT® Screw Press RoS 3
ROTAMAT® Complete Plant Ro5-Bio
STRAINPRESS® Sludgecleaner SP (sludge screening)
Several ROTAMAT® Screw Presses RoS 3 in a biowaste appl


request further information about this solution